Hybrid System
Hybrid System
-
Technical committeeTypeAcronymIEEE 1661-2019CommitteePublished year2019Description
This guide is specifically prepared for a PV/engine generator hybrid power system, but may also be applicable to all hybrid power systems where there is at least one renewable power source, such as PV, and a dispatchable power source, such as an engine generator. Taper-charge parameters for PV hybrid systems are suggested to help in preparing the battery for a capacity test. A test procedure is provided to ensure appropriate data acquisition, battery characterization, and capacity measurements. Finally, a process to review test results and make appropriate decisions regarding the battery is provided. No cycle-life predictions are made.
-
Technical committeeTypeAcronymIEC PAS 62257-10:2017CommitteePublished year2017Description
IEC PAS 62257-10:2017(E) is designed to be used as a guide to visually inspect front-contact poly-crystalline and mono-crystalline silicon solar photovoltaic (PV) modules for major defects. The modules under consideration may be of any size or rated power, however some specific use-cases for solar modules may have different requirements and therefore adaption of this document is application and institution dependent (ex. labelling may not be present for a solar module sold as part of a small off-grid lighting kit). This document is meant to supplement and support rather than replace international testing standards such as IEC 61215.
Technology