Electrical Energy Measurement and Control
-
Technical committeeTypeAcronymIEC TR 62051-1:2004CommitteePublished year2004Description
Reflects the most important terms used in International Standards after the publication of IEC 62051 in 1999. The new terms are mainly related to data exchange with metering equipment for meter reading, tariff and load control using DLMS/COSEM as specified in the IEC 62056 series of standards. The contents of the corrigendum of June 2006 have been included in this copy. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC TR 62051CommitteePublished year1999Description
This technical report provides definitions of terms used in present and future standards on electrical energy measurement, prepared by IEC TC 13. These terms cover electrical energy measurement, tariff and load control, and customer/utility information exchange systems. The report includes terms on Distribution Automation Systems not covered by IEC 60050(371). The report also covers terms on customer/utility information exchange, electricity prepayment systems, and dependablility of electricity metering equipment.
This publication is of high relevance for Smart Grid.
-
Technical committeeTypeAcronymIEC 62059-32-1CommitteePublished year2011Description
IEC 62059-32-1:2011 specifies a method for testing the stability of metrological characteristics of electricity meters, by operating a test specimen at the upper limit of the specified operating range of temperature, voltage and current for an extended period.
-
Technical committeeTypeAcronymIEC 62059-31-1:2008CommitteePublished year2008Description
IEC 62059-31-1:2008 provides one of several possible methods for estimating product life characteristics by accelerated reliability testing. In this standard, elevated, constant temperature and humidity is applied to achieve acceleration. The method takes into account the effect of voltage and current variation. It is applicable to all types of metering equipment for energy measurement, tariff and load control in the scope of IEC TC 13. The method given in this standard may be used for estimating (with given confidence limits) product life characteristics of such equipment prior to and during serial production. This method may also be used to compare different designs. The contents of the corrigendum of December 2008 have been included in this copy. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC 62059-31-1CommitteePublished year2008Description
IEC 62059-31-1:2008 provides one of several possible methods for estimating product life characteristics by accelerated reliability testing. In this standard, elevated, constant temperature and humidity is applied to achieve acceleration. The method takes into account the effect of voltage and current variation. It is applicable to all types of metering equipment for energy measurement, tariff and load control in the scope of IEC TC 13. The method given in this standard may be used for estimating (with given confidence limits) product life characteristics of such equipment prior to and during serial production. This method may also be used to compare different designs. The contents of the corrigendum of December 2008 have been included in this copy.
This publication is of high relevance for Smart Grid.
-
Technical committeeTypeAcronymIEC 62058-31:2008CommitteePublished year2008KeywordsDescription
IEC 62058-31:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC 62058-31CommitteePublished year2008Description
IEC 62058-31:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer.
This publication is of high relevance for Smart Grid.
-
Technical committeeTypeAcronymIEC 62058-3CommitteeDescription
-
Technical committeeTypeAcronymIEC 62058-21:2008CommitteePublished year2008KeywordsDescription
IEC 62058-21:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated electromechanical meters for active energy (classes 0,5, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC 62058-21CommitteePublished year2008Description
IEC 62058-21:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated electromechanical meters for active energy (classes 0,5, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer.
This publication is of high relevance for Smart Grid.