Smart Meter
Smart Meter
-
TypeAcronymNEMA SG-AMI 1-2009 (R2015)Published year2016Description
Defines requirements for smart meter firmware upgradeability in the context of an advanced metering infrastructure system for industry stakeholders such as regulators, utilities and vendors.
Technology -
Technical committeeTypeAcronymITU-T G.9958 (03/2018)Published year2018Description
This recommendation specifies functional definitions of components and networks to provide energy management services in home. It also specifies home network configurations and requirements for these services.
-
Technical committeeTypeAcronymISO 17800:2017CommitteePublished year2017Description
ISO 17800:2017 provides the basis for common information exchange between control systems and end use devices found in single - and multi-family homes, commercial and institutional buildings, and industrial facilities that is independent of the communication protocol in use. It provides a common basis for electrical energy consumers to describe, manage, and communicate about electrical energy consumption and forecasts. ISO 17800:2017 defines a comprehensive set of data objects and actions that support a wide range of energy management applications and electrical service provider interactions including: a) on-site generation, b) demand response, c) electrical storage, d) peak demand management, e) forward power usage estimation, f) load shedding capability estimation, g) end load monitoring (sub metering), h) power quality of service monitoring, i) utilization of historical energy consumption data, and j) direct load control.
Technology -
Technical committeeTypeAcronymIEC TS 62056-8-20:2016CommitteePublished year2016KeywordsDescription
IEC TS 62056-8-20:2016(E) specifies a DLMS/COSEM communication profile that can be used in a smart metering system in which the Neighbourhood Networks (NN) are mesh networks. This profile may be considered as an adaptation and extension of the UDP/IP communication profile specified in IEC 62056-9-7:2013. It specifies a number of features essential to the efficient operation of a large scale AMI using mesh NNs.
Technology -
Technical committeeTypeAcronymIEC TR 62059-21:2002CommitteePublished year2002Description
Describes methods for the collection and analysis of field failure data of static electricity metering equipment using field failure reports and sampling plans.To make results comparable, definitions of equipment complexity and classification of failures are given. A failure reporting form is provided in annex A. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC TR 62059-11:2002CommitteePublished year2002Description
Covers general aspects of the dependability of static metering equipment for electrical energy measurement and load control. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC 62059-31-1:2008CommitteePublished year2008Description
IEC 62059-31-1:2008 provides one of several possible methods for estimating product life characteristics by accelerated reliability testing. In this standard, elevated, constant temperature and humidity is applied to achieve acceleration. The method takes into account the effect of voltage and current variation. It is applicable to all types of metering equipment for energy measurement, tariff and load control in the scope of IEC TC 13. The method given in this standard may be used for estimating (with given confidence limits) product life characteristics of such equipment prior to and during serial production. This method may also be used to compare different designs. The contents of the corrigendum of December 2008 have been included in this copy. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC 62058-31:2008CommitteePublished year2008KeywordsDescription
IEC 62058-31:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC 62058-21:2008CommitteePublished year2008KeywordsDescription
IEC 62058-21:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated electromechanical meters for active energy (classes 0,5, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC 62058-11:2008CommitteePublished year2008KeywordsDescription
IEC 62058-11:2008 specifies the general acceptance inspection methods which apply to newly manufactured electricity meters produced and supplied in lots of 50 and above. This publication is of high relevance for Smart Grid.
Technology