IEC
IEC
-
Technical committeeTypeAcronymIEC 62093:2005CommitteePublished year2005KeywordsDescription
Establishes requirements for the design qualification of balance-of-system (BOS) components used in terrestrial photovoltaic systems. Is suitable for operation in indoor, conditioned or unconditioned; or outdoor in general open-air climates, protected or unprotected. Is written for dedicated solar components such as batteries, inverters, charge controllers, system diode packages, heat sinks, surge protectors, system junction boxes, maximum power point tracking devices and switch gear, but may be applicable to other BOS components.
Technology -
Technical committeeTypeAcronymIEC 62059-32-1CommitteePublished year2011Description
IEC 62059-32-1:2011 specifies a method for testing the stability of metrological characteristics of electricity meters, by operating a test specimen at the upper limit of the specified operating range of temperature, voltage and current for an extended period.
-
Technical committeeTypeAcronymIEC 62059-31-1:2008CommitteePublished year2008Description
IEC 62059-31-1:2008 provides one of several possible methods for estimating product life characteristics by accelerated reliability testing. In this standard, elevated, constant temperature and humidity is applied to achieve acceleration. The method takes into account the effect of voltage and current variation. It is applicable to all types of metering equipment for energy measurement, tariff and load control in the scope of IEC TC 13. The method given in this standard may be used for estimating (with given confidence limits) product life characteristics of such equipment prior to and during serial production. This method may also be used to compare different designs. The contents of the corrigendum of December 2008 have been included in this copy. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC 62059-31-1CommitteePublished year2008Description
IEC 62059-31-1:2008 provides one of several possible methods for estimating product life characteristics by accelerated reliability testing. In this standard, elevated, constant temperature and humidity is applied to achieve acceleration. The method takes into account the effect of voltage and current variation. It is applicable to all types of metering equipment for energy measurement, tariff and load control in the scope of IEC TC 13. The method given in this standard may be used for estimating (with given confidence limits) product life characteristics of such equipment prior to and during serial production. This method may also be used to compare different designs. The contents of the corrigendum of December 2008 have been included in this copy.
This publication is of high relevance for Smart Grid.
-
Technical committeeTypeAcronymIEC 62058-31:2008CommitteePublished year2008KeywordsDescription
IEC 62058-31:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC 62058-31CommitteePublished year2008Description
IEC 62058-31:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer.
This publication is of high relevance for Smart Grid.
-
Technical committeeTypeAcronymIEC 62058-3CommitteeDescription
-
Technical committeeTypeAcronymIEC 62058-21:2008CommitteePublished year2008KeywordsDescription
IEC 62058-21:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated electromechanical meters for active energy (classes 0,5, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer. This publication is of high relevance for Smart Grid.
Technology -
Technical committeeTypeAcronymIEC 62058-21CommitteePublished year2008Description
IEC 62058-21:2008 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated electromechanical meters for active energy (classes 0,5, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer.
This publication is of high relevance for Smart Grid.
-
Technical committeeTypeAcronymIEC 62058-11:2008CommitteePublished year2008KeywordsDescription
IEC 62058-11:2008 specifies the general acceptance inspection methods which apply to newly manufactured electricity meters produced and supplied in lots of 50 and above. This publication is of high relevance for Smart Grid.
Technology