Lighting

IEC 62595-1-1:2013 is a generic specification for backlight unit (BLU) for liquid crystal displays. It defines general procedures for quality assessment and gives general rules for the measuring methods of electrical and optical characteristics, rules for climatic and mechanical tests, and rules for endurance tests.

IEC 62560:2011+A1:2015 specifies the safety and interchangeability requirements, together with the test methods and conditions required to show compliance of LED-lamps with integrated means for stable operation (self-ballasted LED-lamps), intended for domestic and similar general lighting purposes, having:
- a rated wattage up to 60 W;
- a rated voltage of > 50 V up to 250 V;
- caps according to Table 1. The contents of the corrigendum 1 of January 2012, the corrigendum 2 of July 2015 and the corrigendum of Amendment 1 of June 2015 have been included in this copy. This consolidated version consists of the first edition (2011) and its amendment 1 (2015). Therefore, no need to order amendment in addition to this publication.

IEC 62532:2011+A1:2016 specifies the safety requirements for fluorescent induction lamps for general lighting purposes. It also specifies the method a manufacturer should use to show compliance with the requirements of this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure, which can be used to make limited assessment of batches, are also given in this standard. This consolidated version consists of the first edition (2011) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication.

IEC 62504:2014+A1:2018 is of assistance in the common understanding of terms and definitions, relevant for general lighting with LED technology. The terms included are those already available in IEC LED standards or used in manufacturers' literature. This standard provides descriptive terms (like "LED light sources") and measurable terms when modified from IEC 60050-845 (like "colour rendering index"). This first edition cancels and replaces the IEC TS 62504 published in 2011. The significant changes with respect to IEC TS 62504 are as follows:
a) Terms from the International Electrotechnical Vocabulary that have not been modified are deleted;
b) Alignment with the CIE has been done;
c) An introduction has been added. This consolidated version consists of the first edition (2014) and its amendment 1 (2018). Therefore, no need to order amendment in addition to this publication.

IEC 62493:2015 applies to the assessment of lighting equipment related to human exposure to electromagnetic fields. The assessment consists of the induced internal electric field for frequencies from 20 kHz to 10 MHz and the specific absorption rate (SAR) for frequencies from 100 kHz to 300 MHz around lighting equipment. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) identification of lighting product types deemed to comply with the standard without the need for test;
b) deletion of the need for CISPR-15-compliance as a prerequisite for IEC 62493 compliance;
c) inclusion of the consequences of the ICNIPR 2010 guidelines for (up to 100 kHz);
d) adding some guidance to the Van der Hoofden test head method to improve reproducibility of results;
e) inclusion of compliance demonstration method for products having intentional radiators.

IEC 62386-101:2014+A1:2018 is applicable to system components in a bus system for control by digital signals of electronic lighting equipment. This electronic lighting equipment should be in line with the requirements of IEC 61347, with the addition of d.c. supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) collection of all bus timing requirements defined in IEC 62386-101:2009 and IEC 62386-102:2009 and rework of the timing requirements to facilitate the preparation of a future control devices standard, taking particular account of the requirements for multi-master systems. The 10 % tolerances have been replaced by minimum and maximum timing values;
b) integration of multi-master timing requirements;
c) extension of the defined forward frames;
d) addition of wiring requirements;
e) improvement of the bus power supply requirements;
f) improvement of test sequences and description of the test sequences in the form of pseudo code instead of flow charts. This consolidated version consists of the first edition (2014) and its amendment 1 (2018). Therefore, no need to order amendment in addition to this publication.

This publication is to be read in conjunction with IEC 62386-102:2014.

IEC 62035:2014+A1:2016 specifies the safety requirements for discharge lamps (excluding fluorescent lamps) for general lighting purposes. This second edition cancels and replaces the first edition published in 1999, AMD1:2003 and AMD2:2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. Photobiological safety requirements are taken care of on basis of the risk group concept of IEC 62471 and the technical report IEC TR 62778 on blue light hazard. This has consequences for terms, marking, structure of 4.6, and introduction of a new symbol "Caution, do not stare at light source". Special attention is given to blue light hazard. This bilingual version (2016-11) corresponds to the monolingual English version, published in 2014-04. The French version of this standard has not been voted upon.
This consolidated version consists of the second edition (2014) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication.

IEC 62034:2012 specifies the basic performance and safety requirements for individual products and components that are incorporated into automatic test systems for use with emergency lighting systems on supply voltages not exceeding 1 000 V. This second edition cancels and replaces the first edition published in 2006. It constitutes a technical revision. The main changes with respect to the first edition are the improvement of the understanding of the requirements in the various clauses and the compliance requirements listed below and the updating of the normative references.
- 4.2 Monitoring of the timing circuit
- 4.3 Functional requirements
- 4.3.1 The automatic test system (ATS)
- 4.4.2 Intercommunications failure
- 4.4.4 Component failures
- 4.4.7 Software failure
- 5.1 Functional test
- 5.2 Duration test
- 6.2.2 Timing accuracy
- 6.3.2.2 Testing alternate luminaires
- 6.3.3.4 Limited duration test
- 7.1 General.

IEC 62031:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.

IEC 62031:2018 specifies general and safety requirements for light-emitting diode (LED) modules:
- non-integrated LED modules (LEDni modules) and semi-integrated LED modules (LEDsi modules) for operation under constant voltage, constant current or constant power;
- Integrated LED modules (LEDi modules) for use on DC supplies up to 250 V or AC supplies up to 1 000 V at 50 Hz or 60 Hz.
This second edition cancels and replaces the first edition published in 2008, Amendment 1:2012 and Amendment 2:2014. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a. the scope was clarified as well as the wording in several other clauses;
b. the normative references were updated;
c. the definitions for "replaceable LED module", "non-replaceable LED module" and "non-user replaceable LED module" were introduced while other definitions covered by IEC 62504 have been removed;
d. the marking clause was restructured and a table added to provide an informative overview;
e. the marking requirements for built-in LED modules were changed;
f. the entry for the marking with the working voltage was revised;
g. the provisions for terminals and heat management were revised;
h. Annex B was deleted;
i. information for luminaire design with regard to working voltage and water contact was introduced;
j. an abnormal temperature test was introduced.

Relevant to lamps not covered elsewhere in the scope of existing IEC standards. This consolidated version consists of the second edition (2003) and its amendment 1 (2005). Therefore, no need to order amendment in addition to this publication.