Building Automation
Building Automation
-
TypeAcronymISO/TR 52127-2:2021Published year2021Description
This standard PD CEN ISO/TR 52127-2:2021 Energy performance of buildings. Building automation, controls and building management is classified in these ICS categories: 91.120.10 Thermal insulation of buildings. This document contains information to support the correct understanding, use and adoption of ISO 52127-1.
-
TypeAcronymISO/TR 52120-2Published year2021KeywordsDescription
This document contains information to support the correct understanding, use and adoption of ISO 52120‑1.
-
Technical committeeTypeAcronymISO/IEC TR 15067-3-2:2016CommitteePublished year2016Description
ISO/IEC TR 15067-3-2:2016(E) This Technical Report is based on work done by the GridWise Architecture Council. It describes a framework for identifying and discussing interoperability issues to facilitate the integration of entities that interact with electric power systems.
Technology -
Technical committeeTypeAcronymISO/IEC TR 15067-2:1997CommitteePublished year1997DescriptionTechnology
-
Technical committeeTypeAcronymISO/IEC TR 15067-2CommitteePublished year1997DescriptionTechnology
-
Technical committeeTypeAcronymISO/IEC TR 14543-4:2002CommitteePublished year2002KeywordsDescription
This technical report explores the similarities and differences between home and building control systems in an environment where both home and building control interact, namely, a mixed-use residential/commercial building. A logical model for linking building and home control systems is specified. Models showing the organization of application domains, such as energy management and lighting, are included. The option of managing an application domain with a single application controller versus a Fully Distributed System is considered. Methods for overall building management are presented
-
Technical committeeTypeAcronymIEC 63044-6:2021CommitteePublished year2021KeywordsDescription
IEC 63044-6:2021 specifies the requirements for planning and installation of HBES/BACS and the supporting infrastructure. Radio frequency (RF) HBES/BACS are also considered. Safety requirements are covered by IEC 60364 (all parts) Information and communication technology (ICT) and broadcasting and communication technology (BCT) network installations are typically interfaced with HBES/BACS. The requirements for ICT and BCT network installations are covered by ISO/IEC 14763-2. This document does not cover HBES/BACS implementation with: optical fibre, power lines, power over Ethernet (PoE).
-
Technical committeeTypeAcronymIEC 63044-5-3:2017CommitteePublished year2017KeywordsDescription
IEC 63044-5-3:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
-
Technical committeeTypeAcronymIEC 63044-5-2:2017CommitteePublished year2017KeywordsDescription
IEC 63044-5-2:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
-
Technical committeeTypeAcronymIEC 63044-5-1:2017CommitteePublished year2017KeywordsDescription
IEC 63044-5-1:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.