IEEE
IEEE
-
Technical committeeTypeAcronymIEEE 802.3avCommitteePublished year2009Description
This amendment to IEEE Std 802.3-2008 extends Ethernet Passive Optical Networks (EPONs) operation to 10 Gb/s providing both symmetric, 10 Gb/s downstream and upstream, and asymmetric, 10 Gb/s downstream and 1 Gb/s upstream, data rates. It specifies the 10 Gb/s EPON Reconciliation Sublayer, 10GBASE-PR symmetric and 10/1GBASE-PRX Physical Coding Sublayers (PCSs) and Physical Media Attachments (PMAs), and Physical Medium Dependent sublayers (PMDs) that support both symmetric and asymmetric data rates while maintaining complete backward compatibility with already deployed 1 Gb/s.
-
Technical committeeTypeAcronymIEEE 802.3CommitteePublished year2018Description
Ethernet local area network operation is specified for selected speeds of operation from 1 Mb/s to 400 Gb/s using a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) allow use of selected Physical Layer devices (PHY) for operation over coaxial, twisted pair or fiber optic cables, or electrical backplanes. System considerations for multisegment shared access networks describe the use of Repeaters that are defined for operational speeds up to 1000 Mb/s. Local Area Network (LAN) operation is supported at all speeds. Other specified capabilities include: various PHY types for access networks, PHYs suitable for metropolitan area network applications, and the provision of power over selected twisted pair PHY types.(The PDF of this standard is available at no cost to you compliments of the IEEE GET program https://ieeexplore.ieee.org/browse/standards/get-program/page)
-
Technical committeeTypeAcronymIEEE 802.1AECommitteePublished year2020Description
How all or part of a network can be secured transparently to peer protocol entities that use the MAC Service provided by IEEE 802(R) LANs to communicate is specified in this standard. AC security (MACsec) provides connectionless user data confidentiality, data frame integrity, and data origin authenticity. (The PDF of this standard is available at no cost compliments of the IEEE GET program at https://ieeexplore.ieee.org/browse/standards/get-program/page/series?id…)
-
Technical committeeTypeAcronymIEEE 802.15.4g-2012CommitteePublished year2012KeywordsDescription
In this amendment to IEEE Std 802.15.4-2011, outdoor low-data-rate, wireless, smart metering utility network requirements are addressed. Alternate PHYs are defined as well as only those MAC modifications needed to support their implementation.
Technology -
Technical committeeTypeAcronymIEEE 7010-2020CommitteePublished year2020KeywordsDescription
The impact of artificial intelligence or autonomous and intelligent systems (A/IS) on humans is measured by this standard. The positive outcome of A/IS on human well-being is the overall intent of this standard. Scientifically valid well-being indices currently in use and based on a stakeholder engagement process ground this standard. Product development guidance, identification of areas for improvement, risk management, performance assessment, and the identification of intended and unintended users, uses and impacts on human well-being of A/IS are the intents of this standard.
-
Technical committeeTypeAcronymIEEE 656-2018CommitteePublished year2018KeywordsDescription
Uniform procedures are established for manual and automatic measurement of audible noise from overhead transmission lines. Their purpose is to allow valid evaluation and comparison of the audible noise performance of various overhead lines. Definitions are provided, and instruments are specified. Measurement procedures are set forth, and precautions are given. Supporting data that should accompany the measurement data are specified, and methods for presenting the latter are described.
Technology -
Technical committeeTypeAcronymIEEE 644-2019CommitteePublished year2019KeywordsDescription
Uniform procedures for the measurement of power frequency electric and magnetic fields from alternating current (ac) overhead power lines and for the calibration of the meters used in these measurements are established in this standard. The procedures apply to the measurement of electric and magnetic fields close to ground level. The procedures can also be tentatively applied (with limitations, as specified in the standard) to electric fields near an energized conductor or structure.
Technology -
Technical committeeTypeAcronymIEEE 62529-2012 - IEC 62529:2012€CommitteePublished year2012KeywordsDescription
Adoption of IEEE Std 1641-2010. This standard provides the means to define and describe signals used in testing. It also provides a set of common basic signals, built upon formal mathematical specifications so that signals can be combined to form complex signals usable across all test platforms.
-
Technical committeeTypeAcronymIEEE 62243-2010CommitteePublished year2010KeywordsDescription
Data interchange and standard software services for test and diagnostic environments are defined by Artificial Intelligence Exchange and Service Tie to All Test Environments (AIESTATE). The purpose of AI-ESTATE is to standardize interfaces for functional elements of an intelligent diagnostic reasoner and representations of diagnostic knowledge and data for use by such diagnostic reasoners. Formal information models are defined to form the basis for a format to facilitate exchange of persistent diagnostic information between two reasoners and also to provide a formal typing system for diagnostic services. The services to control a diagnostic reasoned are defined by this standard.
-
Technical committeeTypeAcronymIEEE 539-2020CommitteePublished year2020KeywordsDescription
Definitions and usage of terms used in the measurement and analysis of corona and field effects of overhead power lines are presented in this standard. Correlation between measurements from equipment to standard terms is defined. Weather conditions such as rain, snow, fog, and drizzle are defined and their measurement standards discussed. The intent is to assist in correlating standard terms found in literature and requirements to standard engineering practice.
Technology