IEC
IEC
-
Technical committeeTypeAcronymIEC 63119-3CommitteePublished year2022Description
-
Technical committeeTypeAcronymIEC 63119-1CommitteePublished year2019Description
IEC 63119-1 establishes a basis for the other parts of IEC 63119, specifying the terms and definitions, general description of the system model, classification, information exchange and security mechanisms for roaming between EV charge service providers (CSP), charging station operators (CSOs) and clearing house platforms through roaming endpoints. It provides an overview and describes the general requirements of the EV roaming service system. IEC 63119 (all parts) is applicable to high-level communication involved in information exchange/interaction between different CSPs, as well as between a CSP and a CSO with or without a clearing house platform through the roaming endpoint.
IEC 63119 (all parts) does not specify the information exchange, either between the charging station (CS) and the charging station operator (CSO), or between the EV and the CS.Technology -
Technical committeeTypeAcronymIEC 63110-3CommitteePublished year2022Description
-
Technical committeeTypeAcronymIEC 63110-2CommitteePublished year2022Description
-
Technical committeeTypeAcronymIEC 63110-1CommitteePublished year2021Description
-
Technical committeeTypeAcronymIEC 63103CommitteePublished year2020Description
IEC 63103:2020(E) specifies methods of measurement of electrical power consumption in non-active mode(s), as applicable for electrical lighting equipment. This includes electrical lighting equipment incorporating non-illumination components.
This document specifies neither performance requirements nor limits on power consumption.
This document applies to lighting equipment connected to a supply voltage up to 1 500 V DC or up to 1 000 V AC.
This document is intended to be referenced by lighting equipment product standards for the measurement of non-active mode power consumption. Details for the non-active mode power consumption measurement and data presentation are specified in the product standards.Technology -
Technical committeeTypeAcronymIEC 63096CommitteePublished year2020Description
IEC 63096:2020 provides a catalogue of highly recommended and optional security controls graded (see Clause 5 to Clause 20) in line with the security degrees defined by IEC 62645. These are intended for nuclear I&C programmable digital systems and architecture including related activities (I&C platform development, project engineering, operation and maintenance).
This document is intended to be used for designing I&C systems for new NPPs, and modernizing and modifying I&C systems for existing NPPs throughout the I&C programmable digital systems lifecycle. It may also be applicable to other types of nuclear facilities.
This document addresses the whole scope of nuclear I&C programmable digital systems, both safety and non-safety classified. The scope of this document also includes sensors, actuators and electrical systems that belong to the I&C control loop. It is also applicable to those parts of electrical systems covered by IEC 63046, which rely on digital programmable technology. For better readability the terms “nuclear I&C programmable digital systems”, “I&C system” or “I&C platform” used in this document implicitly include electrical systems if the electrical system includes a programmable digital systems.Technology -
Technical committeeTypeAcronymIEC 63092-2:2020CommitteePublished year2020KeywordsDescription
IEC 63092-2:2020 specifies BIPV system requirements and applies to photovoltaic systems that are integrated into buildings with the photovoltaic modules used as building products. It focuses on the properties of these photovoltaic systems relevant to basic building requirements and the applicable electrotechnical requirements. This document addresses requirements on the BIPV systems in the specific ways they are intended to be mounted and the mounting structure, but not the BIPV module itself, which is within the scope of IEC 63092-1.
Technology -
Technical committeeTypeAcronymIEC 63092-1:2020CommitteePublished year2020KeywordsDescription
IEC 63092-1:2020 specifies BIPV (building-integrated photovoltaic) module requirements and applies to photovoltaic modules used as building products. It focuses on the properties of these photovoltaic modules relevant to basic building requirements and the applicable electro-technical requirements. This document addresses requirements on the BIPV modules in the specific ways they are intended to be mounted but not the mounting structure itself, which is within the scope of IEC 63092-2. This document is based on EN 50583-1.
Technology -
Technical committeeTypeAcronymIEC 63067CommitteePublished year2020Description
IEC 63067:2020 applies to plugs and receptacles for single or multiple pole connecting devices used for aeronautical ground lighting applications.
Additional requirements and usage of connecting devices are given in different parts of IEC 61820 series.
Connecting devices complying with this document are suitable for use in environmental class E11 according to IEC 61820-1.Technology