IEC
IEC
-
Technical committeeTypeAcronymIEC 61158-3-11CommitteePublished year2007Description
IEC 61158-3-11:2007 defines in an abstract way the externally visible service provided by the Type 11 fieldbus data-link layer in terms of:
- the primitive actions and events of the service;
- the parameters associated with each primitive action and event, and the form which they take;
- and the interrelationship between these actions and events, and their valid sequences. This first edition and its companion parts of the IEC 61158-3 subseries cancel and replace IEC 61158-3:2003. This part and its Type 11 companion parts also replace IEC/PAS 62406 published in 2005. This edition of this part constitutes a technical addition. This edition includes the following changes:
- deletion of the former Type 6 fieldbus, and the placeholder for a Type 5 fieldbus data-link layer, for lack of market relevance;
- addition of new types of fieldbuses;
- division of this part into multiple parts numbered 3-1, 3-2,..., 3-19. This bilingual version (2013-07) corresponds to the monolingual English version, published in 2007-12. -
Technical committeeTypeAcronymIEC 61158-3-1CommitteePublished year2014Description
IEC 61158-3-1:2014 defines the services provided to the Type 1 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model and systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. This second edition cancels and replaces the first edition published in 2007. It constitutes a technical revision. The main change is the improved terms.
-
Technical committeeTypeAcronymIEC 61158-2CommitteePublished year2014Description
IEC 61158-2:2014 specifies the requirements for fieldbus component parts. It also specifies the media and network configuration requirements necessary to ensure agreed levels of data integrity before data-link layer error checking and interoperability between devices at the physical layer. The fieldbus physical layer conforms to layer 1 of the OSI 7-layer model as defined by ISO 7498 with the exception that, for some types, frame delimiters are in the physical layer while for other types they are in the data-link layer. This sixth edition cancels and replaces the fifth edition published in 2010. It constitutes a technical revision. This edition includes the following changes:
- new Type 20 specification;
- new Type 24 specification;
- RS232 media specification for Type 4 removed. -
Technical committeeTypeAcronymIEC 61158-1CommitteePublished year2014Description
IEC 61158-1:2019 specifies the generic concept of fieldbuses. This document presents an overview and guidance for the IEC 61158 series explaining the structure and content of the IEC 61158 series, relating the structure of the IEC 61158 series to the ISO/IEC 7498-1 OSI Basic Reference Model and showing how to use parts of the IEC 61158 series in combination with the IEC 61784 series. It also provides explanations of some aspects of the IEC 61158 series that are common to the type specific parts of the IEC 61158 5 including the application layer service description concepts and the generic fieldbus data types.
This second edition cancels and replaces the first edition published in 2014. This edition constitutes a technical revision.
This edition includes the following significant changes with respect to the previous edition:
• updates of the references to and information about the IEC 61158 series, IEC 61784 1, IEC 61784 3, IEC 61784-5 series and IEC 61918 throughout the document;
• new Type 25 and the related profile family CPF 20;
• new Type 26 and the related profile family CPF 21. -
Technical committeeTypeAcronymIEC 61140CommitteePublished year2001Description
IEC 61140:2016 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 61140:2016 applies to the protection of persons and livestock against electric shock. The intent is to give fundamental principles and requirements which are common to electrical installations, systems and equipment or necessary for their coordination, without limitations with regard to the magnitude of the voltage or current, or the type of current, and for frequencies up to 1 000 Hz. It has the status of a basic safety publication in accordance with IEC Guide 104. This fourth edition cancels and replaces the third edition published in 2001 and Amendment 1:2004. This edition constitutes a technical revision.
-
Technical committeeTypeAcronymIEC 61131-9CommitteePublished year2013KeywordsDescription
IEC 61131-9:2013 specifies a single-drop digital communication interface technology for small sensors and actuators SDCI (commonly known as IO-Link), which extends the traditional digital input and digital output interfaces as defined in IEC 61131-2 towards a point-to-point communication link. This technology enables the transfer of parameters to Devices and the delivery of diagnostic information from the Devices to the automation system.
-
Technical committeeTypeAcronymIEC 61131-7CommitteePublished year2000KeywordsDescription
Defines a language for the programming of Fuzzy Control applications used by programmable controllers.
-
Technical committeeTypeAcronymIEC 61131-6CommitteePublished year2012Description
IEC 61131-6:2012 specifies requirements for programmable controllers (PLCs) and their associated peripherals, as defined in Part 1, which are intended to be used as the logic subsystem of an electrical/electronic/programmable electronic (E/E/PE) safety-related system. A programmable controller and its associated peripherals complying with the requirements of this part is considered suitable for use in an E/E/PE safety-related system and is identified as a functional safety programmable logic controller (FS-PLC). An FS-PLC is generally a hardware (HW) / software (SW) subsystem. An FS-PLC may also include software elements, for example predefined function blocks.
-
Technical committeeTypeAcronymIEC 61131-5CommitteePublished year2000KeywordsDescription
IEC 61131-5:2000 specifies communication aspects of a programmable controller. It specifies from the viewpoint of a PC how any device can communicate with a PC as a server and how a PC can communicate with any device. In particular, it specifies the behavior of the PC as it provides services on behalf of other devices and the services the PC application program can request from other devices. This bilingual version (2012-08) corresponds to the monolingual English version, published in 2000-11.
This publication is to be read in conjunction with the IEC 61131 series.
-
Technical committeeTypeAcronymIEC 61131-3CommitteePublished year2013KeywordsDescription
IEC 61131-3:2013 specifies the syntax and semantics of a unified suite of programming languages for programmable controllers (PCs). This suite consists of two textual languages, Instruction List (IL) and Structured Text (ST), and two graphical languages, Ladder Diagram (LD) and Function Block Diagram (FBD). This third edition cancels and replaces the second edition, published in 2003 and constitutes a technical revision. It includes the following significant technical changes: It is a compatible extension of the second edition. The main extensions are new data types and conversion functions, references, name spaces and the object oriented features of classes and function blocks.