ISO
ISO
-
Technical committeeTypeAcronymISO 8715CommitteePublished year2001Description
This International Standard specifies the procedures for measuring the road performance of purely electrically propelled passenger cars and commercial vehicles of a maximum authorized total mass of 3 500 kg1_. The road performance comprises road operating characteristics such as speed, acceleration and hill climbing ability.
Technology -
Technical committeeTypeAcronymISO 8714CommitteePublished year2002Description
This International Standard specifies test procedures for measuring the reference energy consumption and reference range of purely electrically propelled passenger cars and commercial vehicles of a maximum authorized total mass of 3 500 kg and maximum speed greater than or equal to 70 km/h.
Technology -
Technical committeeTypeAcronymISO 8713CommitteePublished year2019Description
Establishes a vocabulary of terms and the related definitions used in ISO/TC 22/SC 21 standards specific to the electric propulsion systems of electrically propelled road vehicles, i.e. battery-electric vehicles (BEV), hybrid-electric vehicles (HEV, PHEV), and fuel cell vehicles (FCV, FCHEV).
Technology -
Technical committeeTypeAcronymISO 8601-2CommitteePublished year2019Description
This document specifies additional representations of dates of the Gregorian calendar and times based on the 24-hour clock that extend the basic rules and composite elements of those defined in ISO 8601-1. These representations are specified as character strings for use in information interchange. It is also applicable for representing times and time shifts based on Coordinated Universal Time (UTC).
These extensions include:
— uncertain or approximate dates, or dates with portions unspecified;
— extended time intervals;
— divisions of a year;
— sets and choices of calendar dates;
— grouped time scale units;
— repeat rules for recurring time intervals; and
— date and time arithmetic.
This document excludes the representation of date elements from non-Gregorian calendars, or times not from the 24-hour clock. This document does not address character encoding of representations specified in this document.
-
Technical committeeTypeAcronymISO 8601-1CommitteePublished year2019Description
This document specifies representations of dates of the Gregorian calendar and times based on the 24-hour clock, as well as composite elements of them, as character strings for use in information interchange. It is also applicable for representing times and time shifts based on Coordinated Universal Time (UTC).
This document excludes the representation of date elements from non-Gregorian calendars or times not from the 24-hour clock. This document does not address character encoding of representations specified in this document.
-
Technical committeeTypeAcronymISO 8426CommitteePublished year2008Description
ISO 8426:2008 specifies the methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors under steady-state conditions and at defined, continuous shaft rotational frequencies.
Units can be tested as a positive displacement pump, with mechanical energy applied to the shaft and hydraulic energy obtained at the outlet fluid connection, or as a motor, with hydraulic energy supplied to the inlet fluid connection and mechanical energy obtained at the shaft.
Technology -
Technical committeeTypeAcronymISO 8133CommitteePublished year2014Description
ISO 8133:2014 specifies the mounting dimensions required for interchangeability of accessories for 16 MPa [160 bar)] compact cylinders conforming to ISO 6020-2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020-2, but this does not limit their application.
ISO 8133:2014 covers the following accessories, identified in accordance with ISO 6099: AP6 (rod eye spherical, female thread); AB5 (clevis bracket, spherical eye, in angle); AA6-L (pivot pin, spherical bearing, locking plate); AL6 (locking plate for pivot pin); AP2 (rod clevis, female thread); AP4 (rod eye plain, female thread); AB2 (eye bracket); AB4 (clevis bracket, straight); AA4-S (pivot pin, plain, split pins); AA4-R (pivot pin, plain, rings); AT4 (trunnion bracket).
These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 3322.
ISO 8133:2014 only applies to the dimensional criteria of products manufactured in conformity with this International Standard; it does not apply to their functional characteristics.
Technology -
Technical committeeTypeAcronymISO 8132CommitteePublished year2014Description
ISO 8132:2014 specifies the mounting dimensions required for the interchangeability of accessories for 16 MPa [160 bar] medium series cylinders in accordance with ISO 6020‑1 and for 25 MPa (250 bar) series cylinders, in accordance with ISO 6022. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020‑1 and ISO 6022, but this does not limit their application.
ISO 8132:2014 covers the following accessories, identified in accordance with ISO 6099: AP2 (rod clevis, female thread); AF3 (rod flange, circular); AB4 (clevis bracket, straight); AB3 (clevis bracket, in angle); AT4 (trunnion bracket); AA4-R (pivot pin, plain, cotter pin or snap ring type); AA4-S (pivot pin, plain, split pins); AA6-R (pivot pin, spherical bearing, cotter pin or snap ring type); AA6-S (pivot pin, spherical bearing, split pins); AP6 (rod eye spherical, female thread); AP4 (rod eye plain, female thread).
These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 3322.
ISO 8132:2014 applies only to the dimensional criteria of products manufactured in conformity with this International Standard; it does not apply to their functional characteristics.
Technology -
Technical committeeTypeAcronymISO 7986CommitteePublished year1997Description
This International Standard defines the test conditions and methods for assessing the performance of seals used in oil hydraulic reciprocating applications.
The resulting specified characteristics may be published in manufacturer's literature to enable a direct comparison of seal performance.
The seal under test may be a single seal or a combination seal package.
Technology -
Technical committeeTypeAcronymISO 7790CommitteePublished year2013Description
ISO 7790:2013 specifies clamping dimensions of four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08, and 10, on mounting surfaces. The dimensions and sizes conform to ISO 4401 so as to ensure interchangeability of these valves and to reduce the number of fixing devices to be used.
It applies to clamping dimensions of four-port modular stack valves and four-port directional control valves which represent current practice. They are generally applicable to industrial equipment.
Technology