IEC
IEC
-
Technical committeeTypeAcronymIEC 61215-1-3:2021 RLVCommitteePublished year2021KeywordsDescription
IEC 61215-1-3:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 61215-1-3:2021 lays down requirements for the design qualification of terrestrial photovoltaic modules suitable for long-term operation in open-air climates. The useful service life of modules so qualified will depend on their design, their environment and the conditions under which they are operated. Test results are not construed as a quantitative prediction of module lifetime. This document is intended to apply to all thin-film amorphous silicon (a-Si; a-Si/µc-Si) based terrestrial flat plate modules. As such, it addresses special requirements for testing of this technology supplementing IEC 61215-1:2021 and IEC 61215-2:2021 requirements for testing. This second edition cancels and replaces the first edition of IEC 61215-1-3, issued in 2016. This edition includes the following significant technical changes with respect to the previous edition: a. A cyclic (dynamic) mechanical load test (MQT 20) added. b. A test for detection of potential-induced degradation (MQT 21) added. c. A bending test (MQT 22) for flexible modules.
Technology -
Technical committeeTypeAcronymIEC 61215-1-2:2021 RLVCommitteePublished year2021KeywordsDescription
IEC 61215-1-2:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 61215-1-2:2021 lays down requirements for the design qualification of terrestrial photovoltaic modules suitable for long-term operation in open-air climates. The useful service life of modules so qualified will depend on their design, their environment and the conditions under which they are operated. Test results are not construed as a quantitative prediction of module lifetime. This document is intended to apply to all thin-film CdTe based terrestrial flat plate modules. As such, it addresses special requirements for testing of this technology supplementing IEC 61215-1:2021 and IEC 61215-2:2021 requirements for testing. This document defines PV technology dependent modifications to the testing procedures and requirements per IEC 61215-1:2021 and IEC 61215-2:2021. This second edition cancels and replaces the first edition of IEC 61215-1-2, issued in 2016. This edition includes the following significant technical changes with respect to the previous edition: a. A cyclic (dynamic) mechanical load test (MQT 20) added. b. A test for detection of potential-induced degradation (MQT 21) added. c. A bending test (MQT 22) for flexible modules added.
Technology -
Technical committeeTypeAcronymIEC 61215-1-1:2021 RLVCommitteePublished year2021KeywordsDescription
IEC 61215-1-1:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 61215-1-1:2021 lays down requirements for the design qualification of terrestrial photovoltaic modules suitable for long-term operation in open-air climates. The useful service life of modules so qualified will depend on their design, their environment and the conditions under which they are operated. Test results are not construed as a quantitative prediction of module lifetime. In climates where 98th percentile operating temperatures exceed 70 °C, users are recommended to consider testing to higher temperature test conditions as described in IEC TS 63126. This document is intended to apply to all crystalline silicon terrestrial flat plate modules. This second edition cancels and replaces the first edition of IEC 61215-1-1, issued in 2016. This edition includes the following significant technical changes with respect to the previous edition: a. A cyclic (dynamic) mechanical load test (MQT 20) added. b. A test for detection of potential-induced degradation (MQT 21) added. c. A bending test (MQT 22) for flexible modules added. d. A procedure for stress specific stabilization – BO LID (MQT 19.3) added. e. A final stabilization procedure for modules undergoing PID testing added
Technology -
Technical committeeTypeAcronymIEC 61199CommitteePublished year2011KeywordsDescription
IEC 61199:2011+A1:2012+A2:2014 specifies the safety requirements for single-capped fluorescent lamps for general lighting purposes of all groups having caps according to Table 1. It also specifies the method a manufacturer should use to show compliance with the requirements of this standard on the basis of whole production appraisal in association with his test records on finished products. This method can also be applied for certification purposes. Details of a batch test procedure which can be used to make limited assessment of batches are also given in this standard. This third edition cancels and replaces the second edition published in 1999. It constitutes a technical revision. Main technical changes are the introduction of requirements for high frequency operation, a new temperature measurement position and few new cap-holder fits. This consolidated version consists of the third edition (2011), its amendment 1 (2012) and its amendment 2 (2014). Therefore, no need to order amendments in addition to this publication.
Technology -
Technical committeeTypeAcronymIEC 61195CommitteePublished year1999KeywordsDescription
IEC 61195:1999+A1:2012+A2:2014 specifies the safety requirements fordouble-capped fluorescent lamps for general lighting purposes of all groups having Fa6, Fa8, G5, G13 and R17d caps. Also specifies the method a manufacturer should use to show compliance with the requirements of this standard. The contents of the corrigendum of August 2000 have been included in this copy. This consolidated version consists of the second edition (1999), its amendment 1 (2012) and its amendment 2 (2014). Therefore, no need to order amendments in addition to this publication.
Technology -
Technical committeeTypeAcronymIEC 61167CommitteeDescription
IEC 61167:2018+A1:2018 specifies the performance requirements for metal halide lamps for general lighting purposes.
This fourth edition cancels and replaces the third edition published in 2015. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition.
a) A set of new lamp data sheets has been introduced for lamp types designed for replacing high pressure sodium lamps.
b) A set of new lamp data sheets has been introduced for 4 200 K versions of 3 000 K lamp types already in the standard.
c) A set of new lamp data sheets has been introduced for new lamp types where high frequency ignition data is important.
d) Annex G has been revised to incorporate high frequency ignition. As a consequence of this change, all data sheets in the standard have been revised to a new format.
e) A new informative Annex K has been introduced, giving recommended methods of making lamp temperature measurements.
The contents of the corrigendum of April 2019 have been included in this copy.
This consolidated version consists of the fourth edition (2018) and its amendment 1 (2018). Therefore, no need to order amendment in addition to this publication.Technology -
Technical committeeTypeAcronymIEC 61158-6-9CommitteePublished year2010Description
IEC 61158-6-9:2014 defines the protocol provided to define the wire-representation of the service primitives defined in IEC 61158-5-9, and define the externally visible behavior associated with their transfer. This standard specifies the protocol of the Type 9 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. The main changes are:
- Correct Time-difference valid range;
- Correct Table 3 state transition;
- Include Transparent timeliness class in BNU AREP formal model. -
Technical committeeTypeAcronymIEC 61158-6-8CommitteePublished year2007Description
IEC 61158-6-8:2007 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 8 fieldbus. It specifies interactions between remote applications and defines the externally visible behavior provided by the Type 8 fieldbus application layer. It defines the protocol provided to: define the wire-representation of the service primitives defined in IEC 61158 5-8, and define the externally visible behavior associated with their transfer. It specifies the protocol of the Type 8 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498) and the OSI application layer structure (ISO/IEC 9545). This first edition and its companion parts of the IEC 61158-6 subseries cancel and replace IEC 61158-6:2003 and constitutes a technical revision. It includes the following significant changes from the previous edition:
- deletion of the former Type 6 fieldbus for lack of market relevance;
- addition of new types of fieldbuses;
- partition of part 6 of the third edition into multiple parts. This bilingual version corresponds to the monolingual English version, published in 2007-12. -
Technical committeeTypeAcronymIEC 61158-6-7CommitteePublished year2007Description
IEC 61158-6-7:2007 describes the fieldbus application layer (FAL) which provides user programs with a means to access the fieldbus communication environment. In this respect, the FAL can be viewed as a "window between corresponding application programs." It specifies the protocol of the Type 7 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498) and the OSI application layer structure (ISO/IEC 9545). This first edition and its companion parts of the IEC 61158-6 subseries cancel and replace IEC 61158-6:2003. It includes the following changes:
- deletion of the former Type 6 fieldbus for lack of market relevance;
- addition of new types of fieldbuses;
- partition of part 6 of the third edition into multiple parts numbered -6 2, -6 3,.... This bilingual version (2013-09) corresponds to the monolingual English version, published in 2007-12. -
Technical committeeTypeAcronymIEC 61158-6-5CommitteePublished year2007Description
IEC 61158-6-5:2014 defines the protocol provided to define the wire-representation of the service primitives defined in IEC 61158-5-5, and define the externally visible behavior associated with their transfer. This standard specifies the protocol of the Type 54 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This secod edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. The main changes are:
- Add support for message padding;
- Clarified encoding rules;
- Clarified open session service;
- Time synchronization now present in annunciation message;
- Additional redundancy options in annunciation message.