IEC
IEC
-
Technical committeeTypeAcronymIEC 62931CommitteePublished year2017Description
IEC 62931:2017 This document specifies the safety and interchangeability requirements together with the test methods and conditions required to show compliance of non-integrated tubular LED lamps, intended for general lighting purposes, having:
a rated wattage up to 70 W,
a rated voltage up to 190 V ripple free DC,
GX16t-5 cap as listed in Table 1.
The requirements of this document relate only to type testing.Technology -
Technical committeeTypeAcronymIEC 62925:2016CommitteePublished year2016Description
IEC 62108:2016 defines a test sequence that will quickly uncover CPV module failures that have been associated with field exposure to thermal cycling for many years. This document was specifically developed to relate to thermal fatigue failure of the HCPV die-attach, however, it also applies, to some extent, to all thermal fatigue related failure mechanisms for the assemblies submitted to test.
Technology -
Technical committeeTypeAcronymIEC 62922CommitteePublished year2016KeywordsDescription
IEC 62922:2016 specifies the performance requirements of OLED tiles and panels for use on DC supplies up to 120 V or AC supplies up to 50 V at 50 Hz or 60 Hz for indoor and similar general lighting purposes.
Technology -
Technical committeeTypeAcronymIEC 62920:2017CommitteePublished year2017KeywordsDescription
IEC 62920:2017 specifies electromagnetic compatibility (EMC) requirements for DC to AC power conversion equipment (PCE) for use in photovoltaic (PV) power systems. The PCE covered by this document can be grid-interactive or stand-alone. It can be supplied by single or multiple photovoltaic modules grouped in various array configurations, and can be intended for use in conjunction with batteries or other forms of energy storage. This document covers not only PCE connected to a public low voltage AC mains network or other low voltage AC mains installation, but also PCE connected to a medium or high voltage AC network with or without step-down power transformers.
Technology -
Technical committeeTypeAcronymIEC 62913-2-5CommitteePublished year2017Description
-
Technical committeeTypeAcronymIEC 62913-2-4CommitteePublished year2019Description
IEC SRD 62913-2-4(E) initiates and illustrates the IEC's systems approach based on Use Cases and involving the identification of generic smart grid requirements for further standardization work for the electric transportation domain, based on the methods and tools developed in IEC SRD 62913-1.
This document captures possible "common and repeated usage" of a smart grid system, under the format of "Use Cases" with a view to feeding further standardization activities. Use Cases can be described in different ways and can represent competing alternatives. From there, this document derives the common requirements to be considered by these further standardization activities in terms of interfaces between actors interacting with the given system.
To this end, Use Case implementations are given for information purposes only. The interface requirements to be considered for later standardization activities are summarized (typically information pieces, communication services and specific non-functional requirements: performance level, security specification, etc.).
This analysis is based on the business input from domain experts as well as existing material on electric transportation in a smart grid environment when relevant. -
Technical committeeTypeAcronymIEC 62913-2-3CommitteePublished year2019Description
IEC SRD 62913-2-3 initiates and illustrates the IEC’s systems approach based on Use Cases and involving the identification of generic smart grid requirements for further standardization work for resources connected to the electric power systems – i.e. distributed energy resources, smart home/commercial/industrial/DR-customer energy management, energy storage, and bulk generation domains – based on the methods and tools developed in IEC SRD 62913-1.
This document captures possible "common and repeated usage" of a smart grid system, under the format of "Uses Cases" with a view to feeding further standardization activities. Use Cases can be described in different ways and can represent competing alternatives. From there, this document derives the common requirements to be considered by these further standardization activities in term of interfaces between actors interacting with the given system.
To this end, Use Case implementations are given for information purposes only. The interface requirements to be considered for later standardization activities are summarized (typically information pieces, communication services and specific non-functional requirements: performance level, security specification, etc.).
This analysis is based on the business input from domain experts as well as existing material on grid management in a smart grid environment when relevant. Table 1 highlights the domains and business Use Cases described in this document.
Electric Vehicles are on one hand considered as a DER and normally should fit in IEC SRD 62913-2-3; but on the other hand, and for historical reasons, they are separated into two documents and covered in the IEC SRD 62913-2-4 electric transportation domain. -
Technical committeeTypeAcronymIEC 62913-2-2CommitteePublished year2019Description
IEC SRD 62913-2-2(E) initiates and illustrates the IEC’s systems approach based on Use Cases and involving the identification of generic smart grid requirements for further standardization work for market related domains, based on the methods and tools developed in IEC SRD 62913-1.
It captures possible “common and repeated usage” of a smart grid system, under the format of “Use Cases” with a view to feeding further standardization activities. Use Cases can be described in different ways and can represent competing alternatives. From there, this document derives the common requirements to be considered by these further standardization activities in terms of interfaces between actors interacting with the given system.
To this end, Use Case implementations are given for information purposes only. The interface requirements to be considered for later standardization activities are summarized (typically information pieces, communication services and specific non-functional requirements: performance level, security specification, etc.). -
Technical committeeTypeAcronymIEC 62913-2-1CommitteePublished year2019Description
IEC SRD 62913-2-1 initiates and illustrates the IEC’s systems approach based on Use Cases and involving the identification of generic smart grid requirements for further standardization work for grid related domains – i.e. grid management regrouping: transmission grid management, distribution grid management, microgrids and smart substation automation domains – based on the methods and tools developed in IEC SRD 62913-1.
The Grid management domain groups Use Cases and associated requirements common to the EHV, HV and MV/LV networks operations and the business analysis of the general electric network life cycle. Use Cases specific to parts of the general electric network are described in transmission grid management, distribution grid management, microgrids and smart substation automation clauses.
This document captures possible “common and repeated usage” of a smart grid system, under the format of “Use Cases” with a view to feeding further standardization activities. Use Cases can be described in different ways and can represent competing alternatives. From there, this document derives the common requirements to be considered by these further standardization activities in term of interfaces between actors interacting with the given system.
To this end, Use Case implementations are given for information purposes only. The interface requirements to be considered for later standardization activities are summarized (typically information pieces, communication services and specific non-functional requirements: performance level, security specification, etc.). -
Technical committeeTypeAcronymIEC 62913-1CommitteePublished year2019Description
IEC SRD 62913-1 describes a common approach for IEC technical committees to define generic smart grid requirements for further standardization work. It uses as input the Use Case methodology defined as part of the IEC 62559 series, and provides a more detailed methodology for describing Use Cases and extracting requirements from these Use Cases. This is necessary to achieve a consistent and homogeneous description of generic requirements for the different areas which make up the smart grid environment.